HVAC Training in New Delhi ā Professional HVAC Design, Revit MEP & Practical Training Services
Engineers Group Solution (EGS) provides professional HVAC training services in New Delhi for students, freshers, diploma holders, B.Tech graduates, draftsmen and working professionals who want to build a career in the HVAC and MEP industry.
Our training programs focus on practical knowledge, HVAC system design, AutoCAD drafting, Revit MEP modeling, duct layout preparation, equipment selection and real-world engineering applications. We aim to help learners develop industry-relevant skills for HVAC design, drafting and MEP engineering careers.
Whether you are starting your career or looking to upgrade your technical skills, EGS provides learning support designed around practical HVAC and building services applications.
Professional HVAC Training Institute in New Delhi
EGS offers HVAC training focused on the concepts and workflows used in commercial, residential, industrial and healthcare projects. Our training approach combines fundamental HVAC knowledge with practical drawing and design exercises.
Students can learn how HVAC systems are planned, designed, documented and coordinated with other building services. The training is suitable for learners who want to understand HVAC engineering and develop their design and drafting skills.
Our HVAC Training Courses in New Delhi
Our training topics cover important HVAC and MEP skills, including:
- HVAC Fundamentals and System Types
- HVAC Design and Engineering Basics
- Cooling Load Calculation
- AutoCAD HVAC Drafting
- Revit MEP Training
- HVAC Duct Design and Layout
- Air Conditioning System Selection
- VRV / VRF System Fundamentals
- Chiller and AHU System Basics
- Ventilation and Fresh Air Calculations
- HVAC Equipment Scheduling
- HVAC Shop Drawings
- MEP Coordination
- HVAC Drawing Documentation
HVAC Design and Engineering Training
HVAC design training introduces learners to the basic engineering calculations and design principles required to plan effective heating, ventilation and air conditioning systems.
Students learn how to understand project requirements, calculate cooling loads, determine airflow requirements and develop HVAC layouts based on project conditions.
- Introduction to HVAC Engineering
- Cooling Load Calculation Basics
- TR, CFM and Airflow Calculations
- Fresh Air and Exhaust Air Calculations
- HVAC Equipment Selection Basics
- Duct Sizing and Air Distribution
- Air Changes per Hour (ACPH)
- HVAC System Layout Planning
AutoCAD HVAC Training
AutoCAD is widely used for preparing HVAC layouts, ducting drawings, equipment layouts and construction documentation. Our AutoCAD HVAC training focuses on developing practical drafting skills for building services projects.
- AutoCAD Interface and Essential Commands
- HVAC Layer Management
- Duct Layout Drafting
- Supply and Return Air Layouts
- Fresh Air and Exhaust Duct Layouts
- Equipment Placement in Drawings
- HVAC Symbols and Annotations
- Dimensioning and Drawing Standards
- HVAC Sections and Details
- Drawing Checking and PDF Plotting
Revit MEP Training in New Delhi
Revit MEP training helps learners understand building information modeling (BIM) for mechanical, electrical and plumbing services. The training introduces learners to 3D modeling and coordinated building services documentation.
- Introduction to Revit MEP
- Project Setup and Levels
- HVAC Duct Modeling
- Air Terminal Placement
- AHU and HVAC Equipment Placement
- Duct Routing and Connections
- HVAC Systems and Airflow Concepts
- Views, Sections and Annotations
- Schedules and Quantity Information
- MEP Coordination Basics
- HVAC Drawing Sheets and Documentation
Practical HVAC Project Training
Practical exercises help learners connect theoretical HVAC concepts with the drawings and documentation used in real projects. Training exercises may include sample commercial buildings, office spaces, hospitals and industrial facilities.
- Understanding HVAC Drawings
- Preparing HVAC Layouts
- Duct Routing and Sizing Exercises
- Equipment Layout Preparation
- HVAC Drawing Coordination
- Understanding BOQ and Equipment Schedules
- Drawing Review and Error Identification
- Project Documentation Basics
Practical project exercises and software sessions depend on the selected training program and available course facilities.
VRV / VRF Air Conditioning Training
VRV and VRF systems are commonly used in offices, hotels, commercial buildings and other applications requiring flexible air conditioning. Our training topics introduce learners to the basic components and design considerations of these systems.
- VRV / VRF System Fundamentals
- Indoor and Outdoor Units
- Refrigerant Piping Concepts
- Indoor Unit Selection Basics
- System Layout Understanding
- Equipment Schedule Interpretation
- Installation and Coordination Basics
Chiller, AHU and Central HVAC Training
Central HVAC systems are used in many large commercial, healthcare and industrial projects. Learners can develop a basic understanding of central air conditioning equipment and air distribution systems.
- Chiller System Fundamentals
- Air Handling Unit (AHU)
- Fan Coil Unit (FCU)
- Cooling Tower Basics
- Chilled Water Piping Concepts
- Pump and Valve Fundamentals
- AHU Room and Equipment Layouts
- Central HVAC System Drawings
Ventilation and Duct Design Training
Ventilation is an important part of HVAC engineering because it supports indoor air quality, exhaust removal and airflow management. Training covers the basic principles used to develop ventilation and ducting layouts.
- Supply Air Duct Design
- Return Air Duct Design
- Fresh Air System Design
- Toilet and Kitchen Exhaust
- Basement Ventilation
- Smoke Extraction System Basics
- Louvers, Dampers and Air Terminals
- Duct Insulation Concepts
- Airflow Balancing Fundamentals
MEP Coordination Training
MEP coordination involves planning mechanical, electrical and plumbing services within the same building while minimizing clashes and installation difficulties.
- Introduction to MEP Services
- HVAC Coordination with Electrical Services
- HVAC Coordination with Plumbing
- Service Shaft and Ceiling Coordination
- Clash Identification Basics
- Coordinated Drawing Preparation
- Construction Drawing Interpretation
Who Can Join Our HVAC Training Program?
Our HVAC training programs are suitable for learners who want to gain technical knowledge and develop practical skills related to HVAC design and MEP services.
- B.Tech Mechanical Engineering Students
- Diploma Mechanical Engineers
- ITI and Technical Diploma Holders
- AutoCAD Draftsmen
- Revit MEP Beginners
- Fresh Engineering Graduates
- Working HVAC Professionals
- MEP Design and Drafting Professionals
- Students Interested in Building Services
Career Opportunities After HVAC Training
HVAC training can help learners prepare for entry-level opportunities in air conditioning design, drafting, BIM modeling and building services engineering. Actual job eligibility depends on qualifications, practical skills and employer requirements.
- HVAC Design Engineer
- HVAC Draftsman
- MEP Draftsman
- Revit MEP Modeler
- HVAC CAD Designer
- Junior HVAC Engineer
- HVAC Site Engineer
- MEP Coordination Assistant
- HVAC Estimation Assistant
Why Choose EGS for HVAC Training?
- HVAC and MEP Industry-Focused Learning
- AutoCAD HVAC Drafting Topics
- Revit MEP Modeling Concepts
- Practical Design and Drawing Exercises
- HVAC Equipment and System Knowledge
- Building Services Coordination Basics
- Career-Oriented Technical Learning
- Training Topics Relevant to Construction Projects
Course duration, fees, training mode, practical sessions and certificate availability can be confirmed directly with EGS before enrollment.
Student Testimonials
Student Feedback
Add a verified student testimonial describing their experience with HVAC design, drafting or software training at EGS.
HVAC Training Feedback
Add genuine feedback from a learner who completed the relevant HVAC training program.
Revit MEP Training Feedback
Add a verified review from a student describing the practical knowledge and skills gained during training.
Frequently Asked Questions About HVAC Training in New Delhi
What is HVAC training?
HVAC training teaches the fundamentals of heating, ventilation and air conditioning systems, including design concepts, cooling load calculations, ducting, equipment selection and HVAC drawings.
Does EGS provide AutoCAD HVAC training?
AutoCAD HVAC drafting can be included as a training topic. Contact EGS to confirm the current course structure and availability.
Is Revit MEP included in HVAC training?
Revit MEP topics may be available as part of a dedicated or combined training program. Confirm the modules with EGS before enrollment.
Who can join HVAC training?
Mechanical engineering students, diploma holders, freshers, draftsmen and working professionals interested in HVAC and MEP can enquire about suitable training options.
Can beginners learn HVAC design?
Yes. Beginners can start with HVAC fundamentals, basic calculations and drawing interpretation before progressing to design and software-based exercises.
Does HVAC training guarantee a job?
No training program can guarantee employment. Training can help develop relevant skills, but job opportunities depend on your qualifications, practical ability and interview performance.
Where is EGS located?
EGS is located at B-156, 2nd Floor, New Ashok Nagar, New Delhi.
How can I enquire about HVAC training fees and duration?
Contact EGS by phone or email to confirm the latest course fees, duration, syllabus, schedule and available training options.
Contact EGS for HVAC Training in New Delhi
Company: Engineers Group Solution (EGS)
Office Address:
B-156, 2nd Floor, New Ashok Nagar, New Delhi
Phone:
+91 9266593007
Email:
engineersgroupsolution@gmail.com
Training Location:
New Ashok Nagar, New Delhi
Service Coverage:
New Delhi | Delhi NCR | Noida | Greater Noida | Ghaziabad | Faridabad | Gurugram | Pan India
Interested in HVAC, AutoCAD or Revit MEP training? Contact EGS today to discuss your learning goals, course syllabus, fees and available training options.